EVERBUILD® FIX &FILL Expanding Foam 

ONE-PART, QUICK-SETTING POLYURETHANE FOAM 

PRODUCT DESCRIPTION :

EVERBUILD® FIX & FILL is a quick-setting one-part polyurethane foam in aerosol form. 

FIX & FILL is supplied with attachable nozzles. The foam expands on application up to 150% its original volume . 

Once cured the foam can be cut, sawn or plastered over after only one hour providing the working temperatures (can and surfaces) are between +5°C to +30°C, ideally 20°C. 

USES Filling :

▪ Gaps around pipe entries through walls 

▪ Gaps around window frames, door frames 

▪ Electrical wire chasing prior to plastering 

▪ Deep joints prior to applying sealant or plaster 

▪ Irregular gaps in stone, brick, concrete or plaster Fixing 

▪ Door frames 

▪ Timber structures 

▪ Window sills and thresholds 

▪ Window frames Insulating 

▪ Behind cladding to exterior walls

 ▪ Behind soffit and barge boards CHARACTERISTICS / ADVANTAGES Quick setting – can be cut, sawn or plastered in 1 hour. 

▪ Economical in use – expands up to 55 times its original volume. 

▪ Fills irregular and broad gaps where most conventional fillers would fail. 

▪ Possesses insulating and sound deadening properties. 

▪ Expansion 41 litres (750ml can) 27 litres (500ml can) Cell Structure Medium fine Full Load Bearing Stability App, 24 hours (30mm bead) 

Working Temps 5°C – 30°C. (Optimum 20°C) Temp Res Of Cured Bead Long Term: -40 to +80°C Short Term: -40 to +100°C Building Material Class B3